Equalizing Swing "C" Assembly Washers
The Swing “C” Washer has a concave center for self-locating around the stud, which prevents creeping while tightening, and allows acceptance of the mating spherical flange nuts. The Spherical Flange Nut assures that the washer cannot back out either during clamping or due to vibration during the operation. The shoulder screw has a nylon lock to prevent loosening of the screw during operation.
- Material: C-1018
- Finish: Black Oxide
- Heat Treat: Case Hardened
- Flange Nut and Shoulder
- Available in FixtureProTM Design Software and PartSpec CD
- Part Drawings
- Product Literature
Click the Part Number
in below chart
for Price and Stock Check.
| CAD Download Link |
|1 1/4||1/2||3/8||1 1/8||5/16-18||1/2||1/2||1||41708||39705|
|1 1/2||5/8||3/8||1 5/16||3/8-16||5/8||9/16||1 1/8||41713||39706|
|1 3/4||3/4||1/2||1 9/16||3/8-16||5/8||5/8||1 1/4||41714||39707|
Unless otherwise stated, English units are inches (in) and pounds (lbs) and Metric units are millimeters (mm) and kilograms (kg).